데크피니셔

TEREX | BID-WELL ROLLER PAVER

2450
3600HD
4800RC

480RC SPECIFICATIONS

· POWER UNIT

Standard Kohler gasoline EFI engine
Gross horsepower 25 hp / 18.6 kW
Gross Torque 38.8 lb-ft / 52.6 Nm
Cooling Air
Optional Kubota diesel engine (21hp / 15.6 kW)

· MACHINE FRAME

All welded steel frame for maximum strength with minimum weight
Truss depth 48 in / 1.2 m
Standard machine length 36 ft / 10.9 m
Maximum standard length 120 ft / 36.6 m
Engineered width + 180 ft / 54.9 m
Maximum leg span 117 ft / 35.7 m
Minimum paving width 12 ft / 3.6 m
Maximum paving width
116 ft / 35 m

· CARRIAGE

 Standard Kohler EFI gasoline engine (25 hp / 18.6 kW)
Optional Kubota diesel engine (21hp / 15.6 kW)
Finishing rollers Dual 5 ft / 1.5 m
Strike off auger Dual 8 in / 20 cm Diameter
Rota-Vibe® drum 11.5 in / 29 cm

· MACHINE LEGS

Standard hydraulically powered machine raising and lowering
Leg diameter 6 in / 15 cm
Maximum leg extension range 54.5 in / 1.25 m

· FLUID CAPACITY

Power unit hydraulics 16.3 gal / 60.5 L
Power unit fuel 16 gal / 72 L
Carriage hydraulics 13.3 gal / 50 L
Carriage fuel 16 gal / 72 L

· CARRIAGE

The 4800 paving carriage performs four functions to help finish your concrete deck or slab to job specifications

  • The augers forward of the carriage trim excess concrete.
  • The patented Rota-Vibe® system consolidates the top 2.75 in / 6.9 cm of concrete
  • The paving rollers finish the concrete
  • The drag pan system seals and textures the deck

· ANY SITUATION

The 4800 shares the same versatility as the 2450 and 3600 model pavers while providing larger machine spans and more standard accessories. It’s capable of paving bridge decks, flatwork, roads, side slopes and highways with minimal set up time and the type of flexibility that is not available with other pavers. The 4800 has also been used for a variety of special applications, such as paving tank bottoms and dam faces. If you have a unique application, let us know and we can
design a machine to fit your job specifications.

· REMOTE CONTROL & OPERATOR’S CONSOLE

The new remote control system (Patent Pending) continues to provide safe operation of the paver while adding convenience and enhanced communication between the operator, team members and the concrete placer. Even though the RC unit controls machine: engine, power legs, machine and carriage travel speed functions and can also control most accessories including power crown adjuster, power crown positioning screw and a standard universal arriage/drag pan fogging (excluding internal concrete vibration), the operator’s console is still functional as needed.

· RAISING THE BAR

If the 4800’s standard maximum span of 120 ft / 36.6 m is not long enough to meet your job specifications, the Terex Bid-Well Engineering Department can assist you with a custom machine configuration. With factory consultation, the 4800 is capable of reaching spans well over 180 ft / 54.9 m. This type of configuration is ideal for very large, heavily skewed decks, or paving multiple lanes simultaneously with multiple carriages.

STANDARD 4800RC ROLLER PAVER

Dimensions
A 36.5 ft / 11.12 m I 111 in / 2.8 m
B 33.5 ft / 10.21 m J 48 in / 1.2 m
C 32.5 / 9.91 m K 91 in / 2.3 m
D 15.25 ft / 4.6 m L 33 in / 83 cm
E 54.5 in / 1.38 m M 19 in / 48 cm
F 15 in / 38 cm N 60 in / 1.5 m
G1 | G2** 58 in / 1.4 m | 63 in / 1.6 m O 32 in / 81 cm
H 52 in / 1.32 m P 8 in / 20 cm
Weights
Operating Weight 10,473 lbs / 4,750.5 kg
Carriage 3,282 lbs / 1,476 kg
Power Unit 1,251 lbs / 562 kg
Bogie Wheel (qty 4) 560 lbs / 252 kg

*Standard machine is defined as a 36.5 ft / 11.12 m machine consisting of two 18 ft / 5.4 m truss sections, power unit, carriage, four standard power up and down 6 in / 15 cm legs and leg plates. Terex Bid-Well is not responsible for miscalculated wheel load weights based on the above information. For the most current wheel load weight calculators and machine weights please contact the Terex Bid-Well Service Department at 1-800-843-9824.
** G1 represents carriage retracted | G2 represents carriage extended on cylinder for a stock machine.

ACCESSORIES

Terex Bid-Well offers a large selection of options and accessories for the 4800 model roller paver ranging from power crown adjustment and
carriage foggers to weight distribution systems and traffic machine ends for skewed paving. Shown are just a few of the options available for
contractors to fit their 4800 to meet any job specification. For more information on available options and accessories for the 4800 model roller
paver contact your regional sales representative or the Terex Bid-Well Service Department at 1-800-843-9824.

SKEWABLE SIDEWALK PAVER
6 IN / 15 CM SWING LEG
4 WHEEL TRAVEL DOLLY